Subject | Text |
SMT transistor marked AYG | I have a Pioneers plasma here with a blown SMT transitor marked AYG but I can't find anything on AYG |
Looking for schematic for RCA DRC8335 VCR/DVD-R Combo. | Hi, the unit is RCA branded model DRC 8335B. The board that has the problem is actually the transpor |
|
Possible to use any power adapter with 220v/50hz? | OK, I have a quick question... :)
Why do some "wall wart" power adapters (transformer from AC to |
monitor samsung and smd transistor 109Q | Greetings. :)
For a couple of days trying to find a scheme from the Monitor panel. I do not need a |
| had 2 of those sets recently where the poor focus was caused by the line output transformer itself, |
Anybody has service manual for Sony HST-616? | I want the a service manual for HST-616. There are two defective parts in mine (M50964-212SP) and |
Re: sony cmt cp101 low audio levels | [quote:6cea765a27="dar"]I read this on Wednesday, ordered the transistor on-line as suggested, got t |
| its faulty 32.768 crystal, marked X11 on the top board
gl replacing it |
Bush DVD1005 - resistor burned | I currently have a Bush DVD player, model DVD1005, which does not work. On investigation, a resistor |
| Hello again well after further investigation I have concluded that the relay switch that is closing |
Please help ID component TFK517 | Hi all
Can anyone provide more info on a semiconductor with casing T220, 3 pin (looks like a powe |
| CHECK C701, THE POLARITY MARKED ON THE BOARD IS SOMETIMES INCORRECT, THE POSITIVE LEG OF THE CAP SHO |
Pic of problem | Message returned from your site saying my post & url are marked as spam
Correction of earlier |
| the correct way to enter service mode is to press the test button on the front of the set then press |
| Hi,
Your CRT and/ or FBT maybe getting old. Have u tried adjusting the FBT? There's a pot (usuall |
| [quote:eacd3436c9="Anonymous"]hi,i don't know if this information is of any use as i am new to forum |
| OK, so I've got the LSP ( Large Signal Panel I presume ? ) out & I can't find a V50 connector an |
|
PSU problem Infocus 5700 - heat up caps works | Hi all, I have an Infocus Screenplay 5700 projector with a PSU problem. It fails to startup unless I |
| The next installment:
I found an excel partslist for many cameras which said that the Powershot A60 |
Re: Viewsonic N3245W Black Screen - Need some help | Today, I received a replacement inverter PCB that I ordered from ShopJimmy.com. Smooth transaction, |
| For one thing, there is no lasers in television sets. You have a cold solder connection for the heat |
Re: Need help identifying components please. | Hi,
A 6600 system a customer has experienced a similar problem.
Q5 - a H945 transistor (2SC945 |
Opening Viewsonic PT775 monitor | Hi:
I have an old and trusty Viewsonic PT775 monitor which I have had shipped to me here in the U |
Jvc Tv,AV-14FMG3B is not having picture & sound, power i | It is unlikely to be the timer causing any problems but the timer can be reset simply by swithing "o |
| Transistors with 2N marking and so low numbers are really old (early-mid sixties), so in a ballast f |
| hmm i would tend to agree with minnie on this one and say looks like a faulty scan converter module |
| The screens were supposed to be FLAT since the very begginings of the TV (including those B/W ones), |
| I'm also having this problem. tv shuts of, power light blinking. used to be able to unplug/replug an |
Daewoo 19NF | I have a monitor which seems to be missing red, This condition is present regardless of what is on t |
china made DVD player | Hello!
Is there anybody from you who come across with the problem of this china made DVD player?
I |